千亿qy球友会,千亿球友会

Application Overview

　　Fluidized bed coating machine is a new type of particle coating equipment that organically combines fluidization coating technology and spray technology. It is widely used for film slow and controlled release, skeleton slow and controlled release capsules, pill coating, particle and powder coating.

Equipment characteristics

★Bottom jet fluidization allows the material to have a certain regular operating trajectory, thus obtaining a uniform and continuous coating film.★Powder, particle, pill masking, moisture-proof, oxidation resistant, waterproof, heat resistant, coloring isolation and other coatings.★No loss of coating materials and low production costs.★The route of fog particles to materials is short, so there is no danger of "spray drying".★The cylindrical acceleration container or inverted cone deceleration design can be used for coating particles, large particles, small particles, and pellets.★The material has excellent dispersibility and no adhesion.

Outline Dimensional Drawing

Project specifications			5	15	30	60	120	200	300-800
Inventory		kg/batch	4-6	10-20	25-40	40-80	80-150	150-250	Design according to user requirements
Raw material container capacity		L	15	50	100	220	360	650
Fan power		Kw	4	5.5	7.5	15	18.5	22
Compressed air	Pressure	Mpa	0.6
	Consumption	m³/min	0.4	0.6	0.9	1.3	1.8	2.4
Steam	Pressure	Mpa	0.4-0.6
	Consumption	Kg/h	9KW	64	85	181	250	330
Host size		H1(mm)	2600	2850	3150	3250	3500	3800
		H2(mm)		340	490	590	790	890
		H3(mm)		2630	2930	3020	3280	3580
		B1(mm)	1010	1160	1460	1660	2060	2260
		B2(mm)	1560	1860	2460	2860	3660	4060
		Ø1(mm)	550	700	1000	1200	1600	1800
		Ø2(mm)	180	250	250	280	280	315
		L(mm)	850	1550	1700	1800	2000	2100

All parameters are for reference only, and our company has the right to make changes based on the material situation without prior notice.